Authors
Nitin Sharma
Abstract
The realm of materials investigation is presently surrounded by investigation concentrating on the bulk manufacture, categorization and real-life solicitations of extra-fine carbon flicks the thinnest and finest of them is graphene. Approximately a decade of graphene examination has guaranteed probable presentations containing extra-lasting batteries, extra competent solar cells, corrosion inhibition, circuit panels, display boards, and medical expertise like the point-of-care identification of infections; so it arises as no wonder that there are a number of researchers fervent to create the substantial revolution which could be commercially subjugated and employed into daily life. It was the amalgamation of the simple segregation approach and the finding of the exclusive belongings which initiated the engine that is now graphene examination for ultramodern hi-tech machineries. It wouldn’t be astonishing if the first graphene-based commercially accessible tools and skills come up within the subsequent decade. Numerous methodologies have been applied to manufacture graphene sheets, but still there stays the query of sturdiness and reproducing-ability of the techniques. Taking in to account the existing substructure of the semiconductor production, the electronics technology is very much reliable on silicon. Any methodology should be able to familiarize itself to the present silicon-based technology. Keywords: Graphene, Properties, Applied Engineering, Experiment, Future perspective.
Introduction
Aluminum alloys are the most easily found lightweight supplies that are considered to have a good thermal conductivity. However, the thermal conductivity of aluminum alloys may not be sufficiently good for its utility in the production of compressed heat exchangers for particular usages containing fuel cells. One process to develop the thermal conductivity of aluminum alloys while upholding their light weight is formulating metal matrix composites (MMC) using materials with tremendously high thermal conductivity as strengthening.
Carbon is the sixth element of the periodic table and the first element of the group 14. Graphene is a two-dimensional (one-atom-thickness) allotrope of carbon with a planar honeycomb lattice. In divergence to carbon, silicon doesn’t catenate voluntarily due to the steric effects. The small size of carbon and its electronic configuration makes carbon, an extraordinary element capable of producing multipurpose arrangements with alluring physical as well as chemical properties (Mazdak Taghioskoui, 2009). Graphene was experimentally validated in 2004. It is a building unit for a number of graphitic resources. Graphene demonstrates an outstanding thermal conductivity (~5.30×103 W/mK), 3 intrinsic strength (~130 GPa), 2 charge carrier mobility (~2×105 cm2 / Vs), and surface area (~ 2600 m2 /g).5 Due to its brilliant thermal conductivity, graphene is a considered to be a noteworthy candidate for the substantiation of an aluminum medium to advance the thermal conductivity (Jeon et al., 2014).
References
“Graphene.” Nobelprize.org, 2010, www.nobelprize.org/
Atif, Rasheed, and Fawad Inam. “Fractography Analysis with Topographical Features of Multi-Layer Graphene Reinforced Epoxy Nanocomposites.” Scientific Research, vol. 05, no. 04, 2016, pp. 166–177., doi:10.4236/graphene.2016.54014
Atif, Rasheed, and Fawad Inam. “Modeling and Simulation of Graphene Based Polymer Nanocomposites: Advances in the Last Decade.” Elsevier, vol. 05, no. 02, 2016, pp. 96–142., doi:10.4236/graphene.2016.52011
Daniels, Colin et al. “Elastic, Plastic, and Fracture Mechanisms in Graphene Materials.” Journal of Physics, 27, Sept. 2015. 37, iopscience.iop.org
Dhand, Vivek, et al. “A Comprehensive Review of Graphene Nanocomposites: Research Status and Trends.” Journal of Nanomaterials, vol. 2013, 2013, pp. 1–14., doi:10.1155/2013/763953
Katsnelson, M.i., and K.s. Novoselov. “Graphene: New Bridge between Condensed Matter Physics and Quantum Electrodynamics.” Elsevier, vol. 143, no. 1-2, 2007, pp. 3–13., doi:10.1016/j.ssc.2007.02.043
Randviir, Edward P., et al. “A Decade of Graphene Research: Production, Applications and Outlook.” Materials Today, vol. 17, no. 9, 2014, pp. 426–432., doi:10.1016/j.mattod.2014.06.001
Seo, Chi-Hoon JeonYong-Ha JeongJeong-Jin, and Huynh Ngoc Tien,Sung-Tae Hong,Young-Jin Yum,Seung-Hyun Hur,Kwang-Jin Lee. “Material Properties of Graphene/Aluminum Metal Matrix Composites Fabricated by Friction Stir Processing.” SpringerLink, Springer, Dordrecht, 5 June 2014, link.springer.com/article/10.1007/s12541-014-0462-2
Taghioskoui, Mazdak. “Trends in Graphene Research.” Materials Today, vol. 12, no. 10, 2009, pp. 34–37., doi:10.1016/s1369-7021(09)70274-3
Taleb, Amjad Al, and Daniel Farías. “Phonon Dynamics of Graphene on Metals.” Journal of Physics: Condensed Matter, vol. 28, no. 10, 2016, p. 103005., doi:10.1088/0953-8984/28/10/103005.
How to cite this article?
| APA Style | Sharma, N. (2019). Diversity of Graphene in Applied Engineering. Academic Journal of Applied Engineering, 1(1), 15-18. |
| Chicago Style | |
| MLA Style | |
| DOI | |
| URL |